Carriages and Carriage Parts

Rated by the tine carriage hoisting capacity, there are actually four sizes of hook type blade carriages. The hook type tine carriages have been standardized.

Class I carriages are rated for cargo as much as 2000 lbs. The carriage bar spacing used for Class I is thirteen inches. Class II carriages are rated for loads up to 5,550 lbs. Their carriage bar spacing is sixteen inches. Class III carriages are rated for loads as much as 10,000 lbs. The carriage bar spacing for this class is twenty inches. Class IV carriages are rated for loads as much as 15,500 lbs. The carriage bar spacing used for this capacity is 25 inches.

The carriages for pin type tines may be different depending on the manufacturer. Pin mounted blades may differ by the amount of offset between the fork eye and the tine. Carriage capacity will be determined by the carriage pin size and by the tine size.

Click to Download the pdf

Forklift Masts and Parts

Sort by: Parts | Attachments | Parts By Brand

• 
  Alternators
  

  An alternator is a device that changes mechanical energy into electric energy. This is done in the form of an electrical current. In essence, an AC electrical generator could likewise be called an alternator. The word usually refers to a small, ...

  More
• 
  Brakes
  

  A brake wherein the friction is supplied by a set of brake shoes or brake pads that press against a rotating drum unit called a brake drum. There are a few particular differences among brake drum kinds. A "brake drum" is commonly the definition ...

  More
• 
  Carriage Rollers
  

  Particularly designed bearings known as carriage rollers are frequently seen on lift masts because they allow them to function better within tough environmental surroundings. The typical lift mast is regularly subject to frequent oscillations, ...

  More
• 
  Control Valves
  

  The earliest mechanized control systems were being used more that two thousand years ago. In Alexandria Egypt, the ancient Ktesibios water clock constructed in the 3rd century is considered to be the first feedback control device on record. This ...

  More
• 
  Controllers
  

  Forklifts are available in a wide range of load capacities and various models. The majority of lift trucks in a typical warehouse setting have load capacities between 1-5 tons. Larger scale units are utilized for heavier loads, like for instance ...

  More
• 
  Differentials
  

  A mechanical machine capable of transmitting torque and rotation via three shafts is called a differential. Every now and then but not all the time the differential will employ gears and will function in two ways: in automobiles, it receives one ...

  More
• 
  Drive Axles
  

  The piece of equipment that is elastically fastened to the frame of the vehicle utilizing a lift mast is known as the lift truck drive axle. The lift mast affixes to the drive axle and could be inclined, by no less than one tilting cylinder, ...

  More
• 
  Drive Motors
  

  Motor Control Centers or likewise called MCC's, are an assembly of one or more enclosed sections, that have a common power bus principally containing motor control units. They have been used since the 1950's by the automobile industry, since they ...

  More